top of page
A.jpg

室外型光工作站

Outdoor Platform

N5022 Optical Node
4x4 Fully Segmentable

N5022.png
The N5022 1.2 GHz is a 4-output 4x4 fully segmentable optical node that is capable of providing
up to 59.1 dBmV output at 1218 MHz with an optical input range from -8 dBm to +2 dBm. The
node can have up to four optical receivers and four optical transmitters. Replacing conventional
analog optical modules, two Remote PHY modules can be integrated into the node to provide
high speed full digital optical link for better RF signal quality to meet high-order QAM modulation
and data transmission rate as required by DOCSIS 3.1 standard.
  • Four driven output ports

  • Compact size for a 4x4 segmentable node (8.44” H x 20.22” W x 10.73” D)

  • -20.0 dB directional coupler test points

  • Built-in bridger switching for managing the reverse path @ 0, -3.0, -6.0, and -26.0 dB
    (open) with active status monitoring (optional)

  • Standard push on “F” connectors can be used on all test points

  • DFB, CWDM, & DWDM transmitters available

  • Remote PHY module is available for digital fiber link (option)

  • Plug-in forward and reverse configuration modules allows for easy field reconfiguration to add or remove segmentation as needed

  • 85% efficient 40/90 VAC switch-mode power supply with built-in Triac surge protection

N5022 Optical Node Datasheet (PDF)

N5069 Optical Node 
4x4 Fully Segmentable

N5069.png
The N5069 1.2 GHz is a 4-output 4x4 fully segmentable optical node that is capable of providing
up to 59.1 dBmV output at 1218 MHz with an optical input range from -8 dBm to +2 dBm. The
node can have up to four optical receivers and four optical transmitters. The N5069 is RPhy
capable and is compatible with the Harmonic pebble module. The N5069 optical node is
compatible with the legacy SA6940 platform so it can be directly dropped into the existing
SA6940 footprint to upgrade the HFC network to 1.2GHz bandwidth without re-splicing the cable.
If the existing housing must be replaced the port configuration is the same as the legacy SA6940.
  • Four driven output ports

  • Compact size for a 4x4 segmentable node(8.44” H x 20.22” W x 10.73” D)

  • -20.0 dB directional coupler test points

  • Built-in bridger switching for managing the reverse path @ 0, -3.0, -6.0, and -26.0 dB
    (open) with active status monitoring(optional)

  • Standard push on “F” connectors can be used on all test points

  • DFB, CWDM, & DWDM transmitters available

  • Remote PHY module is available for digital fiber link (option)

  • Plug-in forward and reverse configuration modules allows for easy field reconfiguration
    to add or remove segmentation as needed

  • 85% efficient 40/90 VAC switch-mode power supply with built-in Triac surge protection

N5069 Optical Node Datasheet (PDF)

ACION 5000 Series 
H5000​ Outdoor Mini Virtual HUB
室外型Hub - 適用RFoG 及遠距離光傳輸系統

H5000.jpg
The H5000 is an RFOG Indoor/Outdoor Mini Virtual Hub that provides an optical distribution point for downstream traffic and an aggregation point for upstream traffic, making it easy for cable operators to extend their fiber networks far beyond the traditional hub/headend infrastructure. By using the H5000, the operators can make the best use of their fiber to deliver improved high-speed internet, cable IPTV, and multi-screen services over their existing networks using RFoG technology. The H5000 also allows PON overlay. The Mini-Hub provides Optical Amplification, Wavelength Conversion, Wavelength Collapsing, Optical Muxing/Demuxing/Splitting, and RFoG/PON service.
  • Field-hardened outdoor type housing

  • Single fiber to multi-point distribution

  • One way or bidirectional optical transmission

  • High power multiport C-band EDFA optical amplification

  • Redundant power supplies

  • Built-in optical wavelength Multiplexing and De-Multiplexing modules

  • PON overlay capability

  • No need for a standalone power supply just to feed the hub

  • Cable 40-90 VAC or Mains 90-240 VAC power supply options

H5000 Mini Hub Datasheet (PDF)

ACION 3000 Series
ACION 3422 Optical Node
室外型 1 GHz 光收發機
2x2 Fully Segmentable

ACION-3422.png
The ACION 3422 1GHz is a 4-output 2x2 fully segmentable optical node that is capable of providing up to 52.2 dBmV output at 1002 MHz, and has an optical input level range from -3 dBm to +2 dBm. The node can have up to two optical receivers and two optical transmitters.
  • Four driven output ports

  • Compact size for a 2x2 segmentable node

  • -20.0 dB directional coupler test points

  • 15 Amp power passing

  • Plug-in bridger switching for managing the reverse-path @ 0, -3.0, -6.0, -12.0 dB and open with active status monitoring (optional)

  • Standard push-on “F” connectors can be used on all test points

  • FP, DFB and CWDM transmitters available

  • Redundant receiver & transmitter (optional 1:4 only)

  • Future availability of an 85/105 MHz option that will double the reverse bandwidth

  • Plug-in forward and reverse configuration modules allow for easy field reconfiguration to add or remove segmentation as needed

  • 85% efficient 40/90 VAC switch-mode power supply with built-in Triac surge protection

ACION 3422 Optical Node Datasheet (PDF)
ACION 1002.jpg

ACION 1000 Series 
ACION 1002 Optical Node
室外型 1 GHz 光收發機

1 or 2 Output Optical Node 1002 MHz

The ACION 1002 is a compact economically priced 1 or 2 output node that is ideal for use in HFC, fiber deep, MDU or commercial class services architectures. The node can be configured with either an FP, DFB or CWDM DFB reverse path transmitter.
  • One driven output or two split outputs

  • Modular RF / optics section

  • Plug-in pads and equalizers

  • -20 dB directional coupler test points

  • Optional redundant receiver

  • FP, DFB and CWDM transmitters available

  • 40 to 90 VAC (cable)

  • 90 to 240 VAC (mains)

  • 15 Amp power passing capacity (40 to 90 VAC only)

  • Compact size

  • Up to 52.2 dBmV out at 1002 MHz on the single output version

  • Ideal for HFC and passive architectures, or MDU and commercial class applications

  • Common plug-ins with other ACI nodes and amplifier products

  • Configurable to your specific needs

  • 85/105 MHz frequency option that will double the reverse bandwidth

  • Plug-in location for reverse path rejection filter (sold separately)

ACION 1002 Optical Node Datasheet (PDF)
ACION-1042.jpg

ACION 1000 Series 
ACION 1042 Optical Node
室外型 1 GHz 光收發機

4 Output Optical Node 1002 MHz

The ACION 1042 is a compact economically priced 4 outputs node that is ideal for use in HFC, fiber deep, MDU or commercial class services architectures. The node can be configured with either an FP, DFB or CWDM DFB reverse path transmitter.

​  Features

  • 4 outputs

  • Modular RF/optics section

  • Plug-in pads and equalizers

  • -20 dB directional coupler test points

  • FP, DFB and CWDM transmitters available

  • 40 to 90 VAC (cable)

  • 90 to 240 VAC (mains)

  • 15 Amp power passing capacity (40 to 90 VAC only)

​  Benefits

  • Compact size

  • Up to 46.0 dBmV out at 1002 MHz on each output port

  • Ideal for HFC and passive architectures, or MDU and commercial class applications

  • 85/105 MHz frequency option that doubles the reverse bandwidth

  • Pad adjustable linear equalizers standard

ACION 1042 Optical Node Datasheet (PDF)
bottom of page