top of page
AdobeStock_272314124.jpeg

媒體報導

達運光電綜合新聞

GPON EDFA with WDM for IP(OLT) wavelengths Multi Optical Outputs

(with Pluggable Cooling fans, fan speed monitoring & alarm / for Outdoor Cabinet Environment)



/Overview/


The ACI ED5229GT-E / GTRE series is a high power multi ports EDFA optical booster with gain spectrum bandwith from 1545 to 1563 nm for HFC network. It is designed for the amplification of 1550nm single channel or multi channel wavelengths (ITU wavelength) with WDM for IP(OLT) signal overlay . It has WDM devices integrated for combing GPON(IP) signals of wavelengths 1310nm (upstream) & 1490nm(down stream) with 1550nm broadcasting signal in the same fiber. The ED522 9 GT R E model also integrated a built in optical receiver for directly monitoring the 1550nm si gnal. It is also specially designed with ruggedized components for operation in the temperature range from -5°C to +65°C which is suitable for both indoor and outdoor cabinet environment. The ED5229GT E /GTRE is very compact by design which has pluggable cooling fan modules on the sides with fan speed monitoring and fan failure alarm. It also has pluggable power supp ly modules with on/off switches on the front panel. All optical connectors are positioned at a 60 degree angle to the front panel surface for easy fiber routing. It provides fully front panel access functions including power supply connections on the front panel. It is 2 RU in height and by using a mounting adaptor, it works for both 19 and 21 ra cks and can be installed vertically or horizontally in the cabinet. This series of EDFA offers a flex ible solution for broadcasting large area coverage of metropolitan and medium size cities.


The ED5229GT-E /GTRE EDFA adopts the world s top class pump lase rs and the American brand OFS erbium doped optical fiber. Perfect APC control, excellent design in the ventilation and efficient heat dissipation ensure the long life and high reliability of the product. The pump laser will switch off automatically if the input optical signal power is too low or missing, which offers safety protection for the lasers. The LCD display and LED indicators on the front panel provide system information , real time monitoring and alarm functions for operating this equipment. A RJ 45 interface is available for controlling the unit from a remote PC by a GUI software. Network management via SNMP protocol is possible using the RJ 45 port on the front panel.


/Features/

  • O peration temperature range: -5°C to +65°C (for outdoor cabinet

  • 1545~1563nm operating wavelengths range

  • 32 combined output ports and 32 OLT input ports

  • All front panel access

  • Pluggable Cooling fan modules the side walls

  • With fan speed monitoring and alarm upon failure of cooling fans

  • Pluggable power supply modules with on/off switches

  • All Optical Connectors positioned at 60 angle for easier fiber cable routing

  • Works for 19 or 21 racks and can be mounted horizon tally or vertically

  • Low noise, high reliability

  • Precision APC control

  • Powerful RJ45 (Ethernet) supervisory instruction

  • Efficient space, flexible installation and easy operation

  • A high performance optical output driver circuit and laser TEC to p rovide a highly reliable EDFA.

  • A Built in microprocessor allows the unit to monitor the system parameters.

  • The pump laser auto shut down function is available

  • LED indicator on the front panel show s the alarm status

  • LCD display on the front panel shows the system parameters.

  • Support firmware upgrade download.

  • Support SNMP for network management .

  • 1550nm test port (for ED5229GTRE model








CATV or LAN Amplifier

/Overview/


ACI’s VRA 200 is rack-mountable reverse amplifier for two-way CATV and data networking systems. The VRA 200 is designed for amplification of the reverse path signals. In today’s HFC network, the VRA 200 provides a method to compensate for the splitting and combining losses at the central facility. The VRA 200 is provided in three gain choices (30 dB, 35 dB & 40 dB). Using the latest hybrid technology, it features input and output 20 dB down test points. This permits plug-in attenuator and equalizers for further flexibility or input or output.


/Features/

  • Interstage gain and tilt controls

  • Reverse bandwidth of 5 ~ 200 MHz

  • 120 VAC, 220 VAC or DC powering (DC powering may be connected at all times for standby power in case of AC power failure)

  • -48 VDC optional model also available

  • Return loss 18 dB typical (16 dB worst case)

  • Three levels of surge protection








EDFA for PON or HFC network Multiple Optical Outputs

/Overview/


ACI’s ED5229 series is a high power multi ports EDFA optical booster with gain spectrum band with from 1545 nm to 1563 nm for HFC network It is designed for the amplification of 1550 nm single channel or multi channel wavelengths (ITU wavelength) with WDM option for GPON (OLT) signal overlay . With WDM devices integrated it can combine GPON OLT IP signals of wavelengths 1310 nm (upstream) & 1490 nm (down stream) with 1550 nm signal in the same fiber. A built in optical receiver is optional for directly monitoring the 1550nm RF signal. An

optical switch is also built in for protection of the 1550nm signal. This series of EDF A offers a flexible solution for large area coverage of metropolitan and medium size cities. The ED5229 EDFA adopts the world s top class pump lasers and Erbium /Ytterbium doped special optical fiber for generating high optical output . Perfect APC control, excellent design in the ventilation and heat dissipation ensure s the long life and high reliability of the product The pump laser will switch off automatically if the input optical signal power i s missing, which offers safety protection for the laser. The LCD display and LED indicators on the front panel provide system information , real time monitoring and alarm functions for operating this equipment . A RJ-45 interface is available for controlling the unit from a remote PC by a GUI software. Network management via SNMP protocol is possible using the RJ 45 port on the front panel.


/Features/

  • Operation1545 nm ~ 1563 nm operating wavelengths range

  • 8, 16, 32 or 64 port outputs

  • Built-in WDM for GPON signal (ED5229GP & ED5229GR models)

  • Built-in Optical switch for 1550 nm signal protection (optional)

  • Built-in optical receiver for direct monitoring of 1550 nm RF signal (ED5229GR or ED5229SR models)

  • Low noise, high reliability

  • APC control

  • Powerful RJ-45 supervisory instruction

  • Efficient space, flexible installation and easy operation

  • High performance optical output driver circuit and laser TEC to provide a highly reliable EDFA

  • Built-in microprocessor allows the unit to monitor the system parameters

  • The pump laser auto shutdown function is available

  • LED indicator on the front panel show s the alarm status

  • LCD display on the front p anel shows the system parameters

  • Support firmware upgrade download

  • Support SNMP for network management

  • External 5 volt DC power supply available on back panel








bottom of page