top of page
作家相片TWOWAY GROUP

A8KFDA

1218 MHz CATV or LAN Amplifier

 

/Overview/


This A8KFDA 1218MHz amplifier module has been designed for use in both CATV headend and broadband local area network (LAN) applications. The FDA module is based on ACI’s A8K Transmission platform may be used in any network with a bandwidth requirement of 45 to 1218 MHz. In two-cable networks, it is designed to operate in a one-way mode. Both gain and slope can be adjusted electronically through PCM controller on the A8K platform. The gain control is available for gain adjustment from 0 to 20 dB per 0.5 dB steps. The slope can be adjusted from 0 to 10 dB. Directional coupler test points are available on the rear panel to monitor the input and on the front panel to monitor the output RF levels. On the rear panel are RF input and output ports with F- type connectors.


/Features/

  • Bandwidth 45 to 1218 MHz

  • 32 dB gain at 1218 MHz

  • 0 ~ 20 dB gain control (controlled by microprocessor)

  • 0 ~ 10 dB slope adjustment (controlled by microprocessor)

  • 0 ~ 20 dB RF input level adjustment (controlled by microprocessor)

  • -20 dB DC input test point

  • -20 dB DC output test point

  • 19” Rack mount and 3 RU in height






Comments


bottom of page